Schmitt T Pump

Plastic dry-run safe submersible pumps

The T Pump Series is particularly suitable if containers or dipping baths cannot be flange connected to the side or if the application involves the possibility of dry running.

In the T Pump Series, the motor power is transmitted directly through the extended pump shaft to the impeller. This rotating shaft is exclusively supported through the two motor bearings and therefore runs completely contact free and abrasion-free inside the housing. Due to the design, the use of bearing and shaft seals is not required.

Semi-open impeller means up to 3mm and 10% volume of solids can be handled.

Standard vertical setting depths of 200m to 800 mm.

Typical applications include wafer production, exhaust air scrubber, environment engineering, PCB manufacturing, laboratory, medical and pharmaceutical technology, electro-plating technology, semiconductor technology, wastewater treatment, solar cell production, circulation and mixing applications

Schmitt T series pumps are available in PVDF (polyvinylidene fluoride) or PP (polypropylene).