X Close Icon

Case Studies


Self-Bunded Storage Tank Replacement Project


Replace existing Caustic, Hydrochloric Acid & Sulphuric Acid Storage Tanks with new Chem Resist Spiral Wound High Density Polyethylene Technology Tanks for London Waste.

Customer Requirement:

Removal of existing Sodium Hydroxide, Hydrochloric Acid and Sulphuric Acid tanks and civil work. With temporary pipework to allow continued manufacture. Replacement system to be supplied with improvements to capacity and operator safety.

Chem Resist Solution:

Removal of existing tanks and civils. Civils replaced to reduced budget and timescale. Design, manufacture and installation of tanks with increased capacity to same footprint. Introduction of ChemiGuard offloading and dosing units to increase operator and environmental safety. Temporary pipework allowed uninteruppted production to continue.

Customer Benefits:

A complete replacement system with lower cost civils and increased tank capacity to same footprint to increase supply efficiency. Improved operator and site safety through the containment of chemicals at offload and transfer points in ChemiGuard offload and dosing cabinets.

Equipment Provided:

1x civil plinth with 1x 13.60m3 96% H2SO4, 21.55m3 32% HCl, 16.34m3 50% NaOH Self-Bunded Storage Tanks complete with ladders & handrails. 1x Hydrochloric Acid Tanker Offload Scrubber.

3x ChemiGuard Dosing Systems with 6x Pumps, 3x ChemiGuard Pressurised Tanker Offload Units.

Temporary & Permanent Pipework Installations.

Back to Case Studies